Follow me

Garage Door Repairs Calgary

Garage Door Repairs Calgary

What to do If you need Garage door Repairs Calgary

Through extensive study, it is seen that it is extremely common for people to face problems regarding garage doors. More than often, they magnify to the extent that they need experts to repair it. There can be several reasons due to which the garage door might malfunction.

This might happen if the batteries of the door transmitter are dead and need power. Though it sounds obvious, it is a very common reason. Among other reasons, the photo-eye might be not aligned properly, or the springs might be broken and so on. So, it is important to first identify the problem before solving it.

The garage door repairs  can often malfunction and refuse to close. There can be certain things that can be done to repair this problem.

Holding for long

The garage door can often refuse to close, and this can happen due to various reasons like there might be a problem with the transmitter or with the alignment of the track and several other reasons. One very simple remedy that can be done is to just hold the on and off switch for a longer time than usual and until the door closes. This might not always work but it is worth a try. It might look simple but often there are very small problems which are unidentifiable and doing this might just fix it.

Check sensors

Automatic garage doors have sensors, maybe more than one. Whenever such a problem crops up, the first thing one should do is to check the sensors to make sure they are in proper working conditions. One sensor sends a ray of the infra-red beam of light and if this process is interrupted the garage door will refuse to close.

This is a feature that is designed sue to the safety of the users so that the heavy garage door does not fall on a person and crash as it might be life-threatening. So now, it is essential to check for a physical damage in the sensors or any kind of wiring issue and as soon as the problem is identified, a professional must be called to fix it for good so that no further complicacy arise.

Check transmitter power

This is the simplest thing a person can do when their garage door does not close. It often happens that a person forgets to repower the transmitter and it dies due to which the garage door stops working completely.

So, all that needs to be done is to give the power that the transmitter needs, and it will start working again and achieve perfection again. People often forget to check the most obvious options for a big problem, so keeping this option in mind is important.

LED check

All the sensors contain LED and these LEDs are the main reason these sensors work. So, if these LEDs malfunction the whole system will malfunction, and the garage door will show a lot of problems.

So, it is necessary to call on a professional in order to check if the LEDs are in proper working conditions. If not, then they must be repaired soon, and the garage door will work wonders as good as before.

Proper professional help

It is often noticed that people think that a problem as minimal as the garage door malfunctioning can be easily fixed by them. But they often forget that the garage automation system works with the help of a lot of wiring and sensors which are beyond a layman’s comprehension.

Thus, it is extremely necessary to understand that seeking help is important if they do not want more delay in the fixing process. Professionals are experienced in this matter and they can repair the damage in very less time. Thus, it is always suggested to seek professional help and go to an electrician or any other specific person who has the ability to fix the identified problem.

Garage Pros Ltd

101 1815 16A St SW, Calgary, AB T2T 4J8


Fix electrical connectors

The whole system of the automatic garage works through electrical wiring and as soon as there is a problem with them, there occur major problems in the automation of the garage door.

Thus, first and foremost, the electric wiring must be gotten checked by any professional who has a fair idea about the wiring process. There might be major faults in the wiring. However, sometimes by simply breaking and sequentially making the wire connection again might just fix the entire problem.

Proper regular maintenance

One of the most basic and simple ways of avoiding the malfunction of the garage door is to properly maintain it, service and power it at regular intervals. Every electronic process requires good maintenance and proper servicing.

Technology is formed in order to help human beings, but it requires servicing at regular intervals to provide the kind of performance it is expected to provide. Little things like servicing and a good maintenance schedule helps the system of the automatic garage up and running. And if any problem crops us, then servicing and a thorough check-up becomes an absolute must.


From everything discussed above, it is very clear that people facing technical problems with an automatic garage system is a very common phenomenon all over the world. So, a lot of remedies and precautions are available these days because of a rise in such problems.

There are also some superiorly experienced professional people whose work profiles are designed to deal with complex electronic and wiring problems created in the circuit of the garage system.

There are plenty of inbuilt safety measures in the system already, which occasionally stops, mainly to provide protection and avoid the whole weight of the garage door to crash on the people around and case life-threatening damages.

So, summing up, it is absolutely necessary to first identify the source of the problem and take necessary steps towards properly fixing it so that the same problem does not crop up in the near future. Lastly, it is most significant to properly maintain and provide regular servicing to the system.